Foredom videos introduce new products, explain products, discuss safe and effective use of the tools, demonstrate step-by-step maintenance, and show Foredom rotary tools in action.
Foredom Basics
- Safety Guidelines
- Flex Shaft vs Micromotor
- Proper Set Up
- Attaching and Removing Handpieces and Accessories
- Motor and Flex Shaft Maintenance with Melissa Muir
- Shaft Lubrication
- Shaft Replacement
- Motor Maintenance – Removing Dust and Replacing Motor Brushes
- Learn about Foredom drill presses and handpiece holders – with Melisa Muir
- Handpiece Maintenance – with Melissa Muir
Foredom Shafting in Detail (Shafts and Sheaths)
- Foredom’s shafts: Key Tip, Square Drive, Slip Joint and Non-Conductive plus how to switch from one style to another
- How-To: lubricating and changing standard Key Tip style shafts and sheaths
- How-To: lubricating and changing Square Drive shafts and sheaths
Motor Hangers
- Assembling MAMH-1 and MAMH-2 double motor hangers
Foredom’s Work Bench System
Speed Controls for Flex Shaft Motors
- Overview: speed controls
- How To: change a fuse in current and older speed controls
- How To: replace a Trigger Switch in Foredom’s C.FCT foot speed control and similar plastic housed foot speed controls.
Square Drive Handpieces
- Overview: 4 styles of Square Drive handpieces that work with square drive shafts.
Hammer Handpiece Overview
Overview of the H.15, H.15D and the Micromotor Hammer Handpiece H.MH.110 with Melissa Muir
H.15 Hammer Handpiece
- Overview: H.15 hammer handpiece.
- Shaping & Polishing Anvil Points for Hammer Handpieces with Melissa Muir
Handpiece Maintenance
Melissa Muir Shows The Do’s and Donts of Handpiece Maintenance. (Featuring H.30, H.44T, H.28, H.18, H.20, H.15, H.15D, H.18D and duplex springs)
Handpiece Maintenance-Changing Ball Bearings
- How-To: disassemble H.30 Handpiece to degrease components or to change out ball bearings
- How-To: disassemble H.44T Handpiece to degrease components or to change out ball bearings
Handpiece Maintenance-Adjusting Collets
- How-To: disassemble front end of H.20 Handpiece, adjust holding strength of collet or change out collet.
- How-To: disassemble front end of H.52 Handpiece, adjust holding strength of collet or change out collet.
Series H Shaft Retrofit Kit
- How To: install a connector/adapter on old Series H motors with original both ends square shaft to use current style shaft
Base and Yoke Assembly (UA10451)
- How To: convert a Foredom Hang Up style flexible shaft machine into a base mounted motor
Woodcarving Demonstrations
- 3 videos and 3 different wood carving projects: a Cotton Tail Rabbit, Mallard Drake Duck, and Small Mouth Bass. Master carver and teacher, Frank Russell, discusses tools, workspace, the steps involved in carving with plenty of details for beginners and includes many tips for experienced wood carvers.
Jeff Mathews’ AllSet Stone Setting
- Pave Setting
- Easy Cut Prong Guide for Setting
- V Prong Cutting
PowerGraver Kit
- PowerGraver Kit is designed especially for stone setting and engraving