Previous Product Image

2″ Cut Off Wheel with 3/8″ arbor hole


Brass Brush, A-HB58

Next Product Image

2″ Typhoon Discs, 3/8″ arbor holes choice of contour & grit for 2″ Angle Grinder


2″ dia (51mm) Typhoon Disc with 3/8″ arbor hole, choice of grit and contour. Red = coarse. Blue = fine.  For use on Foredom Angle Grinder.

SKU: A-KB25626 - A-KB25627 - A-KB25628 - A-KB25629 Categories: ,


Foredom offers 2″ Typhoon Tungsten Carbide Discs in coarse and fine grits with round and flat faces for use on its Angle Grinder Attachment. These come with written instructions for installation and use. We also recommend that you watch our video material to get acquainted with these products.

Typhoons have unique structurally aligned tungsten carbide points that last long and do not load quickly. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Typhoons are ideal for use on hard and soft woods, acrylic, die stone, plaster, hard rubber and fiberglass.

10,000 RPM Max Speed.


1. Use with A-69212 Short Hub when mounting discs onto Angle Grinder.

2. Use A-HB58 Brass Brush to easily remove dust or chips from between rows of carbide points .

3. Do NOT use a file card of steel brush to clean Typhoons.

Additional information

Weight 0.1 lbs
Dimensions 3 × 3 × 1 in
SKU - Contour - Grit

A-KB25626 – flat – coarse, A-KB25627 – flat- fine, A-KB25628 – round – coarse, A-KB25629 – round – fine

You may also like…