Kutzall Sphere Burrs:
- Perfect for hollowing-out.
- Shape concave surfaces of spoons, bowls, etc.
- Produce forms with with undercut/overhung edges.
Kutzall Cylinder Burr:
- Cut flat areas, or round-over edges.
- Produce 90-degree corners.
- Tilt to make V-cuts.
- Cut on both the OD and the end of the tool.
Kutzall Flame Burrs:
- Have a more flowing shape.
- Make concave cuts and V-cuts.
- Use tip for detailing or grooving.
Kutzall Taper Burrs:
- The most popular, and perhaps the most versatile shape.
- For outside shaping and rounding edges.
- Make concave cuts and undercuts.
- Create fine details, and access hard-to-reach areas.
Kutzall Ball Nose Burrs:
- Produce flat surfaces or, round-over edges, with the sides.
- Make concave surfaces & hollow out, with the rounded top.
- Produce radius-bottom grooves.
Kutzall Dovetail Burrs:
- Shaped like a reversed taper.
- Produce fine-line details with their sharp corners.
- Make V-cuts and undercuts.
Kutzall Rotor Saw Burrs:
- Versatile, wheel-shaped design.
- Can be easily controlled when cutting in multiple directions.
- Hollow-out or produce grooves, reliefs, or undercuts.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Bur Choice | 1/4" Sphere Burr MCM 50 (Very Coarse), 1/4" x 1/2" Ball Nose Burr MCM 50 (Very Coarse), 1/4" x 1/2" Cylinder Burr MCM 50 (Very Coarse), 1/4" x 1/2" Flame Burr MCM 50 (Very Coarse), 1/4" x 1/2" Taper Burr MCM 50 (Very Coarse), 1/8" x 7/8" Ball Nose Burr MCM 50 (Very Coarse), 1/8" x 7/8" Cylinder Burr MCM 50 (Very Coarse), 1/8" x 7/8" Taper Burr MCM 50 (Very Coarse), 3/4" x 1/8" Rotor Saw Burr MCM 50 (Very Coarse), 3/8" Sphere Burr MCM 50 (Very Coarse), 3/8" x 1/2" Dove Tail Burr MCM 50 (Very Coarse), 4 Piece Burr Kit (Very Coarse) |
