Previous Product Image

Collet for H.10 and H.10D Handpieces – choose 3 mm, 2.35 mm (3/32″) or 1/8″


Choice of Threaded Points: Anvil, Pave or Carbide Stylus for H.15 Hammer Handpiece

Next Product Image

MS10005 Oiler


Foredom motor and handpiece oil in hypodermic dispenser has 0.25 fluid ounces or 7.7ml of oil.


The .25 ounces of oil in this hypodermic dispenser is high grade machine oil. The dispenser has a 1″ long needle with a rubber stopper cap. To dispense, the unit must be squeezed it is not gravity fed.



Info for Lubricating Motors:

Current Foredom motors (not the shaft and sheath but the motor itself) should NEVER be lubricated. The following older models do require routine lubrication:

Series CC, DD and MM sleeve bearing motors

Series EE, GG, and MMG motors

Series R and RB motors

Info for Lubricating Handpieces:

Duplex spring handpieces (H.8D, H.10D, H.15D, H.18D, H.20D, H.52D, H.55D and H.56D) all require lubrications in the duplex spring component

H.10 Quick Change handpiece requires lubrication after first 2-3 months of use

H.15 Hammer handpiece requires periodic lubrication

H.55A and H.56A Angle handpieces require periodic lubrication

Additional information

Weight 0.05 lbs
Dimensions 6 × 1.5 × 1 in