K.1055-2 Dual Handpiece Brushless Kit, 2.35mm (3/32″) or 1/8″ Collet Rotary Brushless AND Chuck Style Brush Type, 230V – International

Use Product Options Menu to Select Collet Size for Brushless Handpiece and Plug Options:

Brushless Handpiece with 2.35mm (3/32″) Collet- UK Plug CE Model (K.1055-21), Continental European Plug CE Model (K.1055-22) and Australian Plug (K.1055-26)

Brushless Handpiece with 1/8″ Collet- UK Plug CE Model (K.105518-21),
Continental European Plug CE Model (K.105518-22) and Australian Plug (K.105518-26)

Dual Port K.1055 or K.105518 Kit:
• High Speed: smooth, clean, and sharp detailing in metal and wood. It’s also great for bright-cutting, grinding, finishing, texturing, and polishing. You never need to changes the brushes on this handpiece.
• Medium Speed: ideal for effortless and fast stock removal in wood, diestone, or acrylics
• Low Speed: extra control and power for stone setting and milling.

Features  • Two Year Limited Warranty
• Brushless means you NEVER change motor brushes
• Maximum Torque or Watts Output 10 oz. in or 70mNm or 230W– even at minimum speeds
• Sealed housing eliminates dust, noise, and vibration
• One port on back of control box for Brushless Handpiece and One on front for Brush Type Micromotor Handpiece

HP4-817 Control Box with LED
• 50/60 Hz, 100VA, 5.4″ wide, 9.1″ deep, 7″ high with built in overload protection
• Dials set precise speed and torque, auto cruise, forward or reverse rotation, dial or foot speed control
• Digital display for precise speed and torque settings

H.MH-150 Brushless Handpiece/Motor
• 50,000 RPM Maximum Operating Speed.
• 6.3″ long, 1.06″ motor diameter, .75″ grip diameter, 8.4 oz/237.7 gr., 115 volt
• Ergonomic and brushless with long-lasting ceramic ball bearings
• Quick and easy bur changeswith a simple twist of the front of the Handpiece
• Chose from 2.35mm (3/32″) or 1/8″ collet.

H.MH-120 Geared 3-jaw #0 Chuck Handpiece/Motor
• Takes any size rotary accessory or drill bit with shanks up to 5/32″ (4mm) diameter.
• For deburring cast pieces, polishing, taking down weld seams, and moderate to heavy grinding and rapid stock removal in metal and wood.
• It comes with a chuck key in molded plastic handle.
• 20,000 RPM Maximum Operating Speed.
• Length= 8-3/32″ / 205.8 mm, weight=1-lb. 2-oz / 510 grams, diameter= 1-1/64″ / 26mm at chuck end, CE compliant.

HP7-7060 Foot Speed Control
• Variable speed foot control works with control box HP4-717. Varies speed from 1,000 – 50,000 RPM.