H.MH-110 Brush Type Hammer Handpiece
Hammer handpiece for stone setting and engraving. Comes in Brush Type Kits K.1080 and K.1090, and Brushless Dual Handpiece Kit K.1053.
$660.35
Hammer handpiece for stone setting and engraving. Comes in Brush Type Kits K.1080 and K.1090, and Brushless Dual Handpiece Kit K.1053.
Hammer Handpiece H.MH-110
• Hammer action engages ONLY when light pressure is applied. This prevents unintended marring or marks and allows precise placement of tool tip.
• Force of impact adjusts from light to full by turning the knurled metal ring while the motor is off or running.
• Speed of the hammer action can be varied from 0– 2,500 strokes per minute using the control box dial.
• Adapters, anvil points, graver holder, screwdriver and spare motor brush pair included.
• Coiled cord connects the handpiece to the Control Unit.Specifications:
6-1/4″ Long, 9/16″ Diameter at grip, 1″ at motor, 13 oz/369g. DC30V/1.5A. CE marked.
Comes supplied in Kits K.1080, K.1090 and Dual Handpiece Kit K.1053. Also works with the same HP4-917 Control Unit that comes with Micromotor Kit K.1070.
• Hammer action engages ONLY when light pressure is applied. This prevents unintended marring or marks and allows precise placement of tool tip.
• Force of impact adjusts from light to full by turning the knurled metal ring while the motor is off or running.
• Speed of the hammer action can be varied from 0– 2,500 strokes per minute using the control box dial.
• Adapters, anvil points, graver holder, screwdriver and spare motor brush pair included.
• Coiled cord connects the handpiece to the Control Unit.Specifications:
6-1/4″ Long, 9/16″ Diameter at grip, 1″ at motor, 13 oz/369g. DC30V/1.5A. CE marked.
Comes supplied in Kits K.1080, K.1090 and Dual Handpiece Kit K.1053. Also works with the same HP4-917 Control Unit that comes with Micromotor Kit K.1070.
Additional information
| Weight | 0.9 lbs |
|---|---|
| Dimensions | 9.5 × 2.25 × 2.25 in |
| SKU - Collet | H.MH-130 – 2.35 mm (3/32"), H.MH-13018 – 1/8" collet |
