Typhoons have unique structurally aligned points that are ideal for rapid and aggressive shaping and roughing out work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Coarse (red) grit are more aggressive than fine (blue) grit, but both will remove a lot of material quickly.
Choose from Coarse (red) or Fine (blue). Sanding sleeves outer diameter is 15/16″, inner diameter is 3/4″, length of sleeves is 1/2″. The Mounted Sleeves come on a 1/4″ shank A-SD143 Drum Mandrel which has a 1/4″ shank
A-KB43524 – Coarse Sleeve Only
A-KB43525 – Coarse Sleeve on Mandrel
A-KB43521 – Fine Sleeve Only
A-KB43522 – Fine Sleeve on Mandrel
AK491 – 6 Fine Unmounted Sleeves
AK492 – 6 Coarse Unmounted Sleeves
Sanding Sleeves are for use on Foredom’s M.BL Lathe and other model bench lathes.
10,000 RPM Max Speed. Made in USA.
Clean with HB58 Brass Brush. Do not use a file card or steel brush to clean Typhoon burs and sleeves.