Use  Product Options Menu for Kit Configurations:

All Sets listed below have an M.TXH Motor

K.8406 has Square Drive Shafting + C.TXR plastic housed foot control + H.44HT collet style handpiece

K.8407 has Square Drive Shafting + C.TXR plastic housed foot control + H.30H chuck style handpiece

K.8408 has Square Drive Shafting + C.SXR metal housed foot control  + H.30H chuck style handpiece

K.8409 has Square Drive Shafting + C.SXR metal housed foot control + H.44HT collet style handpiece

Flex Shaft Tool Sets include popular combinations of motors, speed controls, and handpieces – the three key components of a complete flexible shaft machine. Unlike our Pre-Packed Kits, they do NOT come with any accessory assortments, but do include a tube of grease. Sets come packed in a white box.

Motor and Speed Control carry a 2 Year Limited Warranty.


Series TX Motor:

Foredom’s most powerful flex shaft machines with 1/3HP have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. Comes equipped with a motor bale for hanging, and our standard 39″ long key tip inner shaft and outer sheath for connecting to any of Foredom’s key tip compatible handpieces.

Speed Controls: Each of these have electronics that convert AC current from an electrical outlet to DC current, the type required by Series TX motors. They also have a different style plug that is made to fit the motor’s shielded-type plug to avoid any confusion with other motors you might own.

C.TXR has a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom.

C.SXR foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable electronics as the C.TXR-1.

3. Flexible shaft grease

4. Handpieces- All of these handpieces attach to SQUARE DRIVE shafts:

H.30H Handpiece Foredom’s most popular general purpose handpiece features a 3-jaw, geared chuck with a 0-5/32″ capacity. Accessory changes are easy with this handpiece using the supplied HPCK-0 Chuck Key.

H.44HT Handpiece collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work.


Weight 10 lbs
Dimensions 19 × 12.25 × 4.5 in
TXH configuration options

K.8406 – TXR foot control, 44HT Handpiece, K.8407 – TXR foot control, 30H Handpiece, K.8408 – SXR foot control, 30H Handpiece, K.8409 – SXR foot control, 44HT Handpiece