SR Motor with Dual Speed Range Control PLUS Filer Attachment

SR Motor with Dual Speed Range Control PLUS Filer Attachment

SKU: K.2430.


SR Motor with Dual Speed Range Control PLUS complete AK89130 Filer Kit with handpiece. Offers reciprocating (not rotary) power assist for filing operations.

In stock

Kit K.2430 includes the following:

1. M.SR hang-up style motor equipped with 66″ long (longer than 39″ standard) key tip shafting – see details below

2. EMF-1 Dual Speed Range Dial Control – see details below

3. Filer Kit AK89130 – see details below

Partnered with our flex shaft machine, dual speed range dial control and handpiece, the Filer offers a power assist to tiresome hand filing operations and can be used to file, hone, polish and lap on straight and curved surfaces.

The Filer attachment is a quality-machined, sturdy and compact
device designed for use with our popular H.30® chuck-style handpiece.  The aluminum Filer housing has a pistol grip for ergonomic, easy handling.

Holds tools with shank sizes from 2.35mm (3/32) to 6.4mm (1/4).

Stroke length can be adjusted from 0mm up to 5mm.

Noise level does not exceed 61db at 4,000 SPM.

Comes prelubricated and never requires any additional lubrication.

Has 2.5 : 1 belt drive reduction and runs at a maximum input motor speed of 10,000 RPM, the equivalent of 4,000 SPM.

Dimensions: 7-5/8 from top of Filer head to bottom of installed handpiece, 14.6 oz filer head only, 20.5 oz with handpiece.

M.SR Motor Description: Foredom’s 1/6 HP, universal, flexible shaft machine runs in forward and
reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most
important features our customers expect- power, reversibility,
reliability, and versatility – all in one motor.

In this kit, it comes equipped with a motor bale for
hanging and 66″ long key tip shafting for connecting to any of Foredoms quick
disconnect handpieces.


M.ST motors are available in 115 and 230 Volt.


C.EMF-1 Speed Control Description: Foredom’s Dual Speed Range Dial Control is recommended since it has a LO setting that restricts speed to the allowable range for Filer operation: between 1,000 10,000 RPM or 400 4,000 SPM. The switch also allows you to return the filer to its optimum speed setting without having to adjust the dial setting. The HI setting permits use with rotary handpieces at regular speeds.

Two-Year Limited Warranty on Motor-Speed Control combination.

Filer Kit AK89130 includes:

  1. Filer Head
  2. H.30® Chuck Style Handpiece with Chuck Key
  3. HP89016 Drive Belt, 2 supplied- one comes installed and the other is a spare
  4. A-891016 Small Hex Key, 1.5mm
  5. UA121 Long Hex Key, 3mm
  6. A-69210 Drive Cup (same for Angle Grinder and Belt Sander Attachments)
  7. A-891012 Abrasive Stone Holder made of hardened steel with 1/4 shank.
    Holds bars up to 10mm wide and 5mm thick and rods up to 3.18mm (1/8)
    in diameter. Comes with A-891015 Hex Wrench, 2.5mm
  8. A-891014 V-Block Inserts, 2 supplied
  9. A-69219 Hex Key, 3mm (same for Angle Grinder and Belt Sander Attachments)
  10. A-891013 Face Spanner Wrench
  11. HPG-30 Handpiece Grip 1/8 rubber cushion
  12. AK89101NF  5-Pc Diamond Needle File Set with flat, half round taper,
    round taper, square taper and oval taper. All 3mm diameter shanks and
    150 grit
  13. EDM Abrasive Stones: 1 each of 120 grit A-894120, 220 grit A-894220 and 400 grit A-894400
  14. AP1131 Plastic Carrying Case (shown in separate photo)

One-Year Limited Warranty on Filer


There are no reviews yet.

Be the first to review “SR Motor with Dual Speed Range Control PLUS Filer Attachment”
Copy link
Powered by Social Snap