Use Product Options to Select Handpiece: K.8302 has H.30 Handpiece, K.8310 has H.44T Handpiece, K.8311 has H.8 Handpiece, K.8313 has H.20 Handpiece and K.8322 has H.43T Handpiece.
Flex Shaft Tool Sets include combinations of motors, speed controls, and handpieces – the three key components of a complete flexible shaft machine. Unlike our Pre-Packed Kits, they do NOT include rotary accessory assortments, but do include a tube of grease.
Components:
1. Series SR Motor: best motor for general use. The 1/6 HP, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It comes with a 39″ long key tip inner shaft and outer sheath for connecting to any of Foredom’s key tip compatible handpieces.
2. C.SCT Speed Control: durable electronics and smooth control in a heavy cast iron housing. The added weight eliminates any unexpected movement of the control along the floor and the bottom surface of the speed control is covered with non-skid material. CSA listed.
3. Flexible shaft grease
4. Foredom’s most popular interchangeable handpieces that fit key tip shafts only.
• H.30 Handpiece: chuck-style handpiece features a 3-jaw, geared chuck with a 0-5/32″ capacity. Accessory changes are easy with this handpiece using the supplied HPCK-0 Chuck Key.
• H.44T Handpiece: collet style handpiece is popular in industry and among woodcarvers, accommodates larger accessories with shank diameters up to 1/4″. It comes with 3/32″, 1/8″ and 1/4″ collets. The tapered design allows for close and safe work.
• H.20 Handpiece: “quick change” handpiece is for use ONLY with 3/32″ shank accessories and is popular among jewelers who work with that shank size and make frequent bur changes. Features a molded plastic front grip with tapered sides for easy and close handling. It has pre-lubricated ball bearings that never need lubrication.
• H.43T Handpiece: shorter version of collet-style H.44T and accepts accessories with up to 1/4″ diameter shanks. Has pre-lubricated ball bearings that never need lubrication. Comes with 3/32″, 1/8″ and 1/4″ collets, pin and wrench for changing collets and accessories.
• H.8 Handpiece: slim collet type handpiece with pre-lubricated ball bearings that never need lubrication. It has a chuck guard that slides back when changing burs. Comes with 3/32″ and 1/8″ collets and chuck wrenches for changing collets and accessories.
Reviews
There are no reviews yet.