Use Product Options Menu to Select Speed Control Power Cord Plug Style: K.2250-21 (United Kingdom), K.2250-22 (Continental European), K.2250-26 (Australian), K.2250-32 (Israeli), K.2250-33 (Brazilian- 115V), and K.2250-34 (Brazilian- 230V).
PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.
1. Series LX Motor: permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and 39″ long key-tip inner shaft and outer sheath for connecting to any of Foredom’s key tip compatible handpieces.
M.LX motors are available in 115 Volt and 230 Volt.
Foredom’s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.
2. C.TXR Speed Control same housing as our standard foot operated control but it has electronics the LX and TX motors require to convert AC current from an electrical outlet to DC current. This control also has a different style plug that is made to fit the motor’s shielded-type plug. The C.TXR features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. 7-1/4″ long, 4-1/2″ wide, 2-1/2″ high, 2 lb/1 kg packaged wt.
3. H.15 Hammer Handpiece: has a hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with HP10177 Anvil Point. Also included are R15PT Pave Point and HP10212 Stylus with Carbide Tip. It requires periodic lubrication. Hammer has 1/32″ stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Optional points are available: 6 different shaped Anvil Points (HP10171, HP10172, HP10173, HP10175, HP10176 and HP10179). 6-1/4″ long, 1/4″ dia. at tip, 3.65 oz, 4.85 oz packaged wt. It is a key tip compatible handpiece.
4. Flexible shaft grease