Use Product Options Menu to Select Speed Control Power Cord Plug Style: K.2245-21 (United Kingdom), K.2245-22 (Continental European), K.2245-26 (Australian), K.2245-32 (Israeli), K. 2245-33 (Brazilian- 115V), and K.2245-34 (Brazilian- 230V).
PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.
Motor and Speed Control carry a 2 Year Warranty.
1. Series LX Motor:
These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and our standard 39″ long key tip shafting for connecting to any of Foredom’s key tip compatible handpieces.
Two year warranty on High Torque/Low Speed Series LX Motors and Controls.
M.LX motors are available in 115 Volt and 230 Volt.
Foredom’s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.
2. C.TXR-2 Speed Control looks the same as our standard foot operated control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX and TX motors. This control also has a different style plug that is made to fit the motor’s shielded-type plug. The C.TXR-2 features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. 7″ long, 4-1/2″ wide, 2-38″ high, ship wt 2 lbs./1 kg.
3. 2 Handpieces:
action is all that is required to change accessories. It features a very
slim grip and pre-lubricated ball bearings that do not require any
lubrication. 7″ long, 19/32″ dia., wt. 3.65 oz., ship wt. 4.45 oz.
(0-5,000 rpm) by jewelers for stone setting and decorative work. Comes
with an anvil point (HP10177). It requires periodic lubrication. Hammer
has 1/32″ stroke and its impact can be adjusted from light to heavy by
turning the silver knurled adjusting ring. Optional points are
available: 6 different shaped Anvil Points (HP10171, HP10172, HP10173,
HP10175, HP10176 and HP10179); R15PT Pave Point, and HP10212 Stylus with
Carbide Tip. 6-1/4″ long, 1/4″ dia. at tip, wt. 3.65 oz., ship wt. 4.85 oz.
5. AK90 Accessory Kit: 13-pc. assortment of step drills and steel engraving burs in small round bur holder.
6. Flexible shaft grease.