C.EMF-1 Table Top Control, Dual Speed Range for Series SR Motors

C.EMF-1 Table Top Control, Dual Speed Range for Series SR Motors

SKU: C.EMF-1.

$102.96

Dual speed range table top dial control for Series SR motors. Has ‘LO’ and ‘HI’ settings that either restrict speed or permit complete range of motor speed.

New Dual Speed Range table top speed control was designed for use with the reciprocating (not rotary) Foredom Filer. Set to ‘LO’, motor speed is restricted to between 1,000 – 10,000 RPM or 400 – 4,000 SPM – the Filer’s allowable speed range. Flipping the toggle switch to ‘HI’ permits use with rotary handpieces at regular motor speeds.

This control is also ideal for use with the reciprocating H.50 and H.50C Chisel Handpieces that have low recommended operating speeds of 1,000 – 8,000 RPM.

For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors.

Can also be used with these 115 Volt Discontinued Motors: Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors.

 5″ long, 5-7/8″ wide, 2-3/4″ high, packaged wt-3.5 lb/1.6 kg, 3 Amps, 60 Hz

Replacement
Parts: 3 amp Replacement Fuse, CP10513, is located between the cords in
the back of the speed control box. This fuse is good for both 115V and 230V models.  The 115V Circuit Board, CP10495-F, can also be replaced.
See Related Products below.

Weight 2.6 lbs
Dimensions 9 × 7 × 5 in

Reviews

There are no reviews yet.

Be the first to review “C.EMF-1 Table Top Control, Dual Speed Range for Series SR Motors”
Copy link
Powered by Social Snap