Here a bench style version of Foredom’s High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.TXR-1 foot operated speed control in plastic housing.
Two Year Limited Warranty on Motor and Control.
M.LXB Motor permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with our standard 39″ long key tip shafting for connecting to any of Foredoms quick disconnect handpieces.
M.LXB motors are available in 115 Volt and 230 Volt.
These controls have the same housing as other Foredom speed controls but they convert AC current from an electrical outlet to DC current required by Series LX motors. These controls have a different style plug that is made to fit the motor’s shielded-type plug. Damage will result if the motor is connected to any other speed control.
C.TXR-1 Speed Control foot operated variable speed control is made of heavy duty plastic with durable electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 7″ long, 4-12″ wide, 2-38″ high, ship wt 2 lbs./1 kg.
C.SXR-1 Speed Control has durable electronics as the C.TXR-1. The ergonomics allow precise and reliable variable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor’s shielded plug. 6-3/4″ long, 4″ wide, 2-3/8″ high, ship wt-6 lbs./2.7 kg.
C.EMX-1 Speed Control is a variable speed control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5″ long, 5-34″ wide, 2-58″ high, ship wt 2 lbs./1 kg.
are available separately and Required to Operate your Flex Shaft
Machine. Click on this link to see our extensive line of handpieces. The
Foredom flex shaft system is designed to allow interchangeability of