This kit contains many of the burs from the 33-pc assortment that Frank Russell uses in his 3-disc dvd set, Fur, Feathers and Fins. According to Frank, these accessories are the ones needed to undertake any carving you can hold in your hand. Dominated by our exclusive Typhoon® carbide burs in coarse and fine grit, the kit includes the following accessories:
-
Steel Cutter, Triangle, 3/8″ dia. x 9/16″ long with 1/8″ Shank
-
CeramCut Blue, Flame, 80 grit, 3/32″ Shank, 5/32″ X 3/8″
-
CeramCut Blue, Inverted Cone, 120 grit, 3/32″ Shank, 1/8″ X 1/8″
-
CeramCut Blue, Ball, 120 grit, 3/32″ Shank, 1/8″ X 1/8″
-
CeramCut Blue, Small Cylinder, 120 grit, 3/32″ Shank, 3/32″ X 1/4″
-
CeramCut Blue Stone Point, Cylinder, 1/4″ dia. x 1/2″ long with 3/32″ Shank, 80 Grit
-
CeramCut Blue Stone Point, Round Top Taper, 1/8″ dia. x 1/2″ long with 3/32″ Shank, 120 Grit
-
CeramCut Blue Stone Point, Round Top Taper, 1/8″ dia. x 1/2″ long with 3/32″ Shank, 80 Grit
-
Typhoon Bur, Cylinder, Fine, Blue, 1/4″ Shank, 13/16″ dia. x 1-1/4″ long
-
Typhoon, Flame, Fine, 1/4″ Shank, 7/8″ X 1 3/8″
-
Typhoon, Cylinder, Fine, 1/8″ Shank, 5/16″ X 1/2″
-
Typhoon, Flame, Fine, 1/8″ Shank, 7/16″ X 5/8″
-
Typhoon Bur, Flame, Fine, Blue, 3/32″ Shank, 5/16″ dia. x 1/2″ long
-
Tapered Mandrel, 1/8″ Shank
-
Plated Diamond Point, Flame, 1.6mm dia. x 9.0mm long, 2.35mm (3/32″) Shank
-
Plated Diamond, Flame, 3/32″ Shank, 2.6mm X 8.0mm
-
Plated Diamond, Inverted Cone, 3/32″ Shank, 2.6mm X 2.0mm
-
Plated Diamond, Sphere, 3/32″ Shank, 2.2mm X 1.6mm
-
Ruby Carver, Ball, 4.5 mm dia. with 2.35 mm (3/32″) Shank
-
Ruby Carver, Coarse, Flame, 3/32″ Shank, 6.5mm X 12mm
-
Ruby Carver, Flame, 3.3 mm dia. x 8.0 mm long with 2.35 mm (3/32″) Shank
-
2″ Nylon Soft Fine Bristle Brush
25,000 RPM Max Speed, 10,000 RPM on 1/4″ Typhoons.
Reviews
There are no reviews yet.