Browse Categories

Collets, Adapters, Wrenches, Fuse, Graver Holder, Splashback Kit

Displaying products 1 - 15 of 15 results
HPL4-3236 Collet Adapter, 1/8" to 3/32"
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 1/8" collet and allows the use of smaller, 3/32" shank size accessories. No need to change handpiece collets.
HPL4-3234 Collet Adapter, 1/8" to 1/16"
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 1/8" collet and allows the use of smaller, 1/16" shank size accessories. No need to change handpiece collets.
HPL4-3233 Collet Adapter, 3/32" to 1/16"
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 3/32" collet and allows the use of smaller, 1/16" shank size accessories. No need to change handpiece collets.
HPL4-3235 Collet Adapter, 3.0mm to 3/32"
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 3.0mm collet and allows the use of smaller, 3/32" shank size accessories. No need to change handpiece collets.
HPL4-3237 Collet Adapter, 3.0mm to 1.6mm
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 3.0mm collet and allows the use of smaller, 1.6mm shank size accessories. No need to change handpiece collets.
HP4-117 Collet for Micromotor Handpiece, 2.35mm
Price: $31.50
2.35mm (3/32") Collet for use in most of Foredom's Micromotor Handpieces. See details for models.
HP4-117B Collet for Micromotor Handpiece, 3.18mm (1/8")
Price: $31.50
3.18mm (1/8") Collet for use in most of Foredom's Micromotor Handpieces. See details for models.
HP4-117C Collet for Micromotor Handpiece, 3mm
Price: $31.50
3mm Collet for use in most of Foredom's Micromotor Handpieces. See details for models.
HP7-5008 Collet for Micromotor Handpiece, 2.35mm
Price: $31.50
2.35mm (3/32") Collet for use in older Brushless Handpiece H.MH-150 with serial nos. 807xxxx and below - prior to 11/08.
HP7-5007 Collet for Micromotor Handpiece, 3.18mm
Price: $31.50
3.18mm (1/8") Collet for use in older Brushless Handpiece H.MH-150 with serial nos. 807xxxx and below - prior to 11/08.
HP7-5006 Collet for Micromotor Handpiece, 3mm
Price: $31.50
3mm Collet for use in older Brushless Handpiece H.MH-150 with serial nos. 807xxxx and below - prior to 11/08.
Fuse for HP4-917 Micromotor Control Unit, HP4-110
Price: $3.50
Replacement 3 Amp fuse for HP4-917 Micromotor Control Unit. Control comes in Micromotor Kits K.1020, K.1070, K.1080 and K.1090.
Splashback Kit, AK103
Price: $12.00
Protects flex shaft and mircomotor handpieces from corrosion due to splash back from water and other coolants while drilling with diamond bits into pearls and gemstones.
HP4-993 Collet Changing Wrench Set
Price: $6.00
Wrench set used for changing collets in the H.MH-170, H.MH17018, H.MH150, H.MH15018 and discontinued M.MH-145A handpieces.
HPH8-214 Graver Holder
Price: $20.00
Screws into the front end of the HPMH-011 micromotor handpiece and converts it into a power engraving tool. Comes with 5/64" allen key.