Browse Categories

K.8320 Equine Dental Kit, Square Drive with Handpiece


Item Number K.8320
Price $389.00
QTY:
Motor and Speed Control combination for equine dental applications. Includes 1/6 horsepower, reversible M.SR Hang-Up style motor and C.SCT-1 variable speed foot control. The motor in this kit comes installed with the special Square Drive S-10827-NC NON-CONDUCTIVE inner shaft and S-10801-NC special Heavy Duty, NON- CONDUCTIVE outer sheath.
Components:
1. Series SRH Motor:
  The 1/6 hp, ball bearing, hang-up style M.SRH runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors - 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging and a longer, heavy duty, Non-Conductive square drive shaft and outer sheath for connecting to Foredoms special square drive handpieces.
The S-10827-NC is a special 63-13/16" long, square drive inner shaft with plastic, non-conductive coupling and the S-10801-NC is a special longer, heavy duty sheath with plastic non-condutive connectors. Together they prevent the flow of stray current through the shaft and down into the handpiece. They were developed by our engineers for equine dentists and other users with similar applications. Standard key tip shafts and sheaths are 39" long and have metal couplings. The special shaft and shaft that comes on this motor fits all Series SR and Series TX motors, as well as other models.
More about Square Drive Shafts and Heavy Duty Sheaths:
Square drive inner shafts are different from our standard key tip models and must be installed along with a heavy duty outer sheath. Foredom motors equipped with this style shaft and sheath are designated as "heavy duty" and have the letter "H" added to their part numbers. Heavy duty flex shaft machines are considered the ultimate power tools for deburring, buffing, grinding, polishing, and metal finishing with larger rotary accessories. Square drive shafts and heavy duty sheaths connect ONLY to our four 'square drive' handpieces - H.25H, H.28H, H.30H and H.44HT and CANNOT be used with any of our 'interchangeable handpieces.
The sheathing material is also stiffer and less flexible than the standard type. Replacement shafts require a VERY light coating of Foredom grease before use. Be sure to unplug your motor before doing any maintenance and never operate your Foredom without the outer sheath attached.We suggest that you view our maintenance videos before installing this item.  

2. C.SCT-1 Speed Control: This foot operated speed control comes in a heavy cast iron metal housing. The extra weight provides added stability and control. The bottom surface of the C. SCT is covered with non-skid material. It features the same durable, solid state electronics as the C.FCT. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors. CSA Listed. It is interchangeable with Foredom's C.FCT-1 and C.EM-1 controls.
7" long, 5" wide, 2-1/2" high, packaged wt-6 lb/2.7 kg
, 4 Amps, 60 Hz
Can also be used with these
115 Volt Discontinued Motors: Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors.
The C.SCT-1 can also used with a Dremel 732 flex shaft tool to vary speed.
3. H.44HT Handpiece: H.44HT is a collet type square drive handpiece that accepts accessories with up to 1/4" diameter shanks. Has positive locking mechanism (locking ring) for use with Series SRH, TXH, LXH and discontinued H motors and pre-lubricated ball bearings that do not require maintenance. Comes with 3/32", 1/8" and 1/4" (installed) collets, pin and wrench for changing collets and accessories. 
6-1/4" long, 1" dia. (center), 3/4" dia. (taper), ship wt. 8.85 oz. 
This handpiece is NOT interchangeable with Foredom's "Interchangeable" style handpieces. Other size collets are available separately or in Collet Set HP440.

Related Products

MP132P Motor Brush Pair
Price: $9.00
Motor brush pair for Series SR and SRH motors, 115 Volt (domestic) and 230 Volt (international). See details.
MAMH-1 Double Motor Hanger with Mounting Clamp
Price: $49.00
Double Motor hanger with bench clamp mount features 3-pc hexagonal support rod and safety hook rod for holding one or two motors. IMPORTANT: Work Bench System Component Arms do NOT fit MAMH-1.
MS10006 Grease
Price: $3.50
Foredom Flexible Shaft Grease in a 1 oz container. Click More Info for details.
H.25H Handpiece, Square Drive
Price: $165.00
Heavy duty collet-style handpiece for use with Series SRH, TXH and LXH square drive flex shafts ONLY. Comes with 1/8" and 1/4" collets.
S-10801-NC Heavy Duty Sheath for SRH, TXH and LXH motors, Optional 63-1/8" Non-Conductive
Price: $57.00
Optional 63-1/8" long, Non-Conductive, Heavy Duty outer sheath for replacement on Series SRH, TXH, and LXH motors.
S-10827-NC Square Drive Shaft for SRH, TXH and LXH motors, Optional 63-13/16" Non-Conductive
Price: $24.00
Optional 63-13/16" long, Non-Conductive square drive inner shaft for replacement on Series SRH, Series TXH, and Series LXH motors.