Browse Categories

C.EMHF-2 Table Top Control, Dual Speed Range for 230 Volt International Series SR Motors

Price $99.00
Product Options
Plug Options:
Use Product Options Menu to Select Power Cord Plug Option: -2 for US Plug (C.EMF-2), -21 for UK Plug (C.EMF-21), -22 for Continental European (C.EMF-22) or -26 for Australian Plug (C.EMF-26).

New Dual Speed Range table top speed control was designed for use with the reciprocating (not rotary) Foredom Filer. Set to 'LO', motor speed is restricted to between 1,000 - 10,000 RPM
or 400 - 4,000 SPM - the Filer's allowable speed range. Flipping the toggle switch to 'HI' permits use with rotary handpieces at regular motor speeds.

This control is also ideal for use with the reciprocating H.50 and H.50C Chisel Handpieces that have low recommended operating speeds of 1,000 - 8,000 RPM.

For use with 230 Volt M.SR, M.SRB, M.SRH and M.SRBH motors.

Can also be used with these
230 Volt Discontinued Motors: Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors.

 5" long, 5-7/8" wide, 2-3/4" high, packaged wt-3.5 lb/1.6 kg, 3 Amps, 60 Hz

Replacement Parts: 3 amp Replacement Fuse, CP10513, is located between the cords in the back of the speed control box. This fuse is good for both 115V and 230V models.  The 230V Circuit Board, CP10495-2F, can also be replaced. See Related Products below.

Related Products

CP10495-2F Circuit Board for Dual Speed Range Dial Controls, 230V
Price: $47.00
Replacement circuit board for C.EMF-2 Dual Speed Range table top dial speed controls, 230 volt.
CP10513 Fuse for Dial Speed Controls and BL Lathes, 3 Amp
Price: $1.00
3 Amp fuse for Dial Speed Controls. Also for 115 Volt and 230 Volt M.BL Bench Lathes with detachable power cords. Fuse receptacle is rectangular.