Browse Categories

2" Typhoon Disc, Flat Face, Coarse

Item Number A-KB25626
Price $38.00
Typhoons have unique structurally aligned tungsten carbide points that last long and do not load quickly. Use the fine grits for general shaping and sanding. The coarse grit is for rapid and aggressive shaping and roughing out work. Typhoons are ideal for use on hard and soft woods, acrylic, die stone, plaster, hard rubber and fiberglass.
10,000 RPM Max Speed.

Use with A-69212 Short Hub when mounting discs onto Angle Grinder.
2. Use A-HB58 Brass Brush to easily remove dust or chips from between rows of carbide points .
3. Do NOT use a file card of steel brush to clean Typhoons.

Related Products

A-69212 Short Hub, 5mm
Price: $4.00
5mm high Short Hub with 8mm screw used for mounting accessories with arbor hole depths between 1/32" (1mm) and 5/32" (4mm) onto angle grinder. Included in Angle Grinder Kits– it secures the installed flap wheel to grinder.
Brass Brush, A-HB58
Price: $5.20
Use to remove dust or chips from between rows of Typhoon points. 5/8" wide x 5-3/4" long. Bristles: 3/8" wide x 1-3/4" long x 5/8" high