Browse Categories
Foredom videos are used to: introduce new products, clarify features within existing lines, discuss safe and effective use of our tools, demonstrate step-by-step maintenance procedures, and depict Foredom rotary tools in action. Our videos are stored on and when you click to view one you are taken there and then returned to Foredom.

Foredom Basics:
1. Safety Guidelines
2. Proper Set Up
3. Attaching and Removing Handpieces and Accessories
4. Shaft Lubrication
5. Shaft Replacement
6. Motor Maintenance - Removing Dust and Replacing Motor Brushes

Foredom Shafting in Detail (Shafts and Sheaths):
1. Comprehensive description of Foredom's shafting styles
(Key Tip, Square Drive, Slip Joint and Non-Conductive) with
instructions for switching from one style to another
2. 'How-To' instructions for lubricating and changing standard
Key Tip style shafts and sheaths
3. 'How-To' instructions for lubricating and changing heavy duty
Square Drive shafts and sheaths

Motor Hangers:
1. Foredom's Work Bench Component System
2. Instructions for assembling MAMH-1 and MAMH-2 double
motor hangers

Series H Shafting Retrofit Kit:
Instructions for installing connector/adapter on old Series H motors with square ends on both sides of shaft for using current style shafting

Base and Yoke Assembly (UA10451):
Instructions for converting your Foredom Hang Up style flexible shaft
machine into a base mounted model

Speed Controls for Use with Flex Shafts:
1. Overview of speed control options
2. Instructions for changing fuse in all current and older models

Square Drive Handpieces:
Overview of the 4 styles of these specialized handpieces that work
with square drive heavy duty shafting.

Handpiece Maintenance-Changing Ball Bearings:

1. 'How-To' disassemble H.30 Handpiece to degrease components
and/or to change out ball bearings   
2. 'How-To' disassemble H.44T Handpiece to degrease components
and/or to change out ball bearings

Handpiece Maintenance-Adjusting Collets:
1. 'How-To' disassemble front end of H.20 Handpiece to adjust
holding strength of collet and/or to change out collet.

2. 'How-To' disassemble front end of H.52 Handpiece to adjust
holding strength of collet and/or to change out collet.

Foredom Micromotors:
1. Overview of Foredom's K.1070 High Speed Rotary, K.1020 Chuck Style with High Torque, and K.1080 Hammer Kits
2. K.1070 - Instructions for changing accessories and collets
3. K.1070 - Instructions for changing motor brushes
4. K.1070 - Instructions for changing fuse
5. Overview of Foredom's Brushless K.1050 Micromotor Kit
6. K.1050 - Instructions for changing accessories and collets
7. K.1030 - Portable Micromotor with Lithium Ion Battery for use on-the-go


New C        
Foredom Bench Lathe– Also see Wayne Werner Videos:
1. Overview of Foredom's M.BL Bench Lathe with Tapered Spindles
2. Bench Lathe Attachments
3. Dust Collector and Filter Hoods
4. Using a Flexade to Convert your Lathe into a Flex Shaft Machine

Angle Grinder for Use with H. 30® Handpieces and 2" Accessories:
1. Kit Contents and Installing on Handpiece
2. Using PSA
3. Using Grinding Wheels
4. Using Typhoon Tungsten Carbide Discs
5. Using Scotch-Brite Radial Bristle Discs
6. Using Abranet Sanding Screens
7. Using Felt and Cut Off Wheels
8. Using Quick Change Discs
9. Using Screw-Lok Mandrel and Accessories

'Foredom in Action' Presents–
Jeff Mathews' AllSet Stone Setting:

1. Pave Setting
2. Easy Cut Prong Guide for Setting
3. V Prong Cutting

'Foredom in Action' Presents–
Wayne Werner's Work Smarter NOT Harder:

Segment 1: Motor Overview
Segment 3: Choice of Interchangeable Handpieces
Segment 4: Polishing with Buffs using the BL Bench Lathe and Filter Hood
Segment 5: Using the K.3340 Bench Lathe Kit with Wheel Mandrel and Collet Holder
Segment 6: Using the Foredom/Wayne Werner AK3375 Sanding Accessories Kit
Segment 7: Using the Foredom/Wayne Werner AK3371 Polishing Accessories Kit

Lighted Work Chamber, MALC15

Dust Collector, MADC20

Mobile Work Station, MAWS10