Here our higher torque flex shaft model, the M.TX Hang-up style Motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.SXR-1 foot operated Speed Control in metal housing.
Two Year Limited Warranty on Motor and Control.
M.TXH Motor Description:
This square drive model has exactly the same motor specifications as the M.TX.
Series TX motors are Foredoms most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. Square drive flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.
This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Square drive shafting ONLY works with Foredom's 4 square drive handpieces- the H.25H, H.28H, H.30H and H.44HT.
The M.TXH hang-up model is also available in prepackaged kit K.TXH440.
M.TXH motors are available ONLY in 115 Volt.
Foredoms permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control.
C.SXR-1 Speed Control Description:
Handpieces are available separately and Required to Operate your Flex Shaft Machine.
H.25H, H.30H, H.44HT and H.28H are Foredom's four square drive
handpieces that work with this motor-speed control combination and are
shown below under Related Products.
This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.
For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors.
6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.
It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls.
Hang-Up style motors require the use of a motor hanger (available
separately) to secure the tool above the work bench. See Related