Browse Categories

Hang-Up Motor with Square Drive Shafting and Dial Control, M.TXH-EMX


Item Number M.TXH-EMX
Price $365.00
QTY:
Here our higher torque flex shaft model, the M.TX Hang-up style Motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.EMX-1 table top dial Speed Control in plastic housing.
Two Year Limited Warranty on Motor and Control.

M.TXH Motor Description:
This square drive model has exactly the same motor specifications as the M.TX.
Series TX motors are Foredoms most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. Square drive flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.
This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Specialized square drive shafting ONLY works with Foredom's 4 square drive handpieces- the H.25H, H.28H, H.30H and H.44HT.
 
The M.TXH hang-up model is also available in prepackaged kit K.TXH440.  

M.TXH motors are available ONLY in 115 Volt.

Foredoms permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control.

C.EMX-1 Speed Control Description: 
The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-34" wide, 2-58" high, ship wt 2 lbs./1 kg.


Handpieces are available separately and Required to Operate your Flex Shaft Machine. H.25H, H.30H, H.44HT and H.28H are Foredom's four square drive handpieces that work with this motor-speed control combination and are shown below under Related Products.

Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.



Related Products

H.44HT Handpiece, Square Drive
Price: $75.00
Collet-style handpiece for use with Series SRH, TXH and LXH square drive flex shafts ONLY. Comes with 3/32", 1/8", 1/4" collets.
H.30H Handpiece, Square Drive
Price: $75.00
3-jaw chuck style handpiece for use with Series SRH, TXH and LXH square drive, heavy duty flex shafts ONLY. Comes with chuck key.
MAMH-1 Double Motor Hanger with Mounting Clamp
Price: $49.00
Double Motor hanger with bench clamp mount features 3-pc hexagonal support rod and safety hook rod for holding one or two motors. IMPORTANT: Work Bench System Component Arms do NOT fit MAMH-1.
H.25H Handpiece, Square Drive
Price: $165.00
Heavy duty collet-style handpiece for use with Series SRH, TXH and LXH square drive flex shafts ONLY. Comes with 1/8" and 1/4" collets.
H.28H Handpiece, Square Drive
Price: $68.00
Slender collet-style handpiece for use with Series SRH, TXH and LXH with square drive shafting. Comes with 3/32" and 1/8" collets.