Browse Categories

Micromotor Parts, More

Displaying products 1 - 25 of 25 results
HP4-163 Motor Brush Pair for H.MH-170 Handpiece
Price: $17.00
Motor Brush Pair for use in H.MH-170 and H.MH-17018 Micromotor Handpieces.
HP8-163 Motor Brush Pair for H.MH-130 Handpiece
Price: $17.00
Motor Brush Pair for use in H.MH-130 or H.MH-13018 Micromotor Handpieces.
HPL4-504 Motor Brush Pair for HPMH-011 Handpiece
Price: $19.50
Motor Brush Pair for use in MPMH-011 Hammer Micromotor Handpiece and discontinued H.MH-145A and H.MH-135 Rotary Handpieces.
HP2-326 Motor Brush Pair for H.MH-120 Handpiece
Price: $15.00
Motor Brush Pair for use in H.MH-120 Micromotor Handpiece.
HPL4-304 Motor Brush Pair for H.MH-145 Handpiece
Price: $20.50
Motor Brush Pair for use in discontinued H.MH-145 Micromotor Handpiece.
HPL4-3236 Collet Adapter, 1/8" to 3/32"
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 1/8" collet and allows the use of smaller, 3/32" shank size accessories. No need to change handpiece collets.
HPL4-3234 Collet Adapter, 1/8" to 1/16"
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 1/8" collet and allows the use of smaller, 1/16" shank size accessories. No need to change handpiece collets.
HPL4-3233 Collet Adapter, 3/32" to 1/16"
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 3/32" collet and allows the use of smaller, 1/16" shank size accessories. No need to change handpiece collets.
HPL4-3235 Collet Adapter, 3.0mm to 3/32"
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 3.0mm collet and allows the use of smaller, 3/32" shank size accessories. No need to change handpiece collets.
HPL4-3237 Collet Adapter, 3.0mm to 1.6mm
Price: $16.30
This is NOT a collet. It is a 'step down' adapter that fits inside a 3.0mm collet and allows the use of smaller, 1.6mm shank size accessories. No need to change handpiece collets.
HP4-117 Collet for Micromotor Handpiece, 2.35mm
Price: $31.50
2.35mm (3/32") Collet for use in most of Foredom's Micromotor Handpieces. See details for models.
HP4-117B Collet for Micromotor Handpiece, 3.18mm (1/8")
Price: $31.50
3.18mm (1/8") Collet for use in most of Foredom's Micromotor Handpieces. See details for models.
HP4-117C Collet for Micromotor Handpiece, 3mm
Price: $31.50
3mm Collet for use in most of Foredom's Micromotor Handpieces. See details for models.
HP7-5008 Collet for Micromotor Handpiece, 2.35mm
Price: $31.50
2.35mm (3/32") Collet for use in older Brushless Handpiece H.MH-150 with serial nos. 807xxxx and below - prior to 11/08.
HP7-5007 Collet for Micromotor Handpiece, 3.18mm
Price: $31.50
3.18mm (1/8") Collet for use in older Brushless Handpiece H.MH-150 with serial nos. 807xxxx and below - prior to 11/08.
HP7-5006 Collet for Micromotor Handpiece, 3mm
Price: $31.50
3mm Collet for use in older Brushless Handpiece H.MH-150 with serial nos. 807xxxx and below - prior to 11/08.
Fuse for HP4-917 Micromotor Control Unit, HP4-110
Price: $3.50
Replacement 3 Amp fuse for HP4-917 Micromotor Control Unit. Control comes in Micromotor Kits K.1020, K.1070, K.1080 and K.1090.
Splashback Kit, AK103
Price: $12.00
Protects flex shaft and mircomotor handpieces from corrosion due to splash back from water and other coolants while drilling with diamond bits into pearls and gemstones.
HP4-993 Collet Changing Wrench Set
Price: $6.00
Wrench set used for changing collets in the H.MH-170, H.MH17018, H.MH150, H.MH15018 and discontinued M.MH-145A handpieces.
HPH8-214 Graver Holder
Price: $20.00
Screws into the front end of the HPMH-011 micromotor handpiece and converts it into a power engraving tool. Comes with 5/64" allen key.
Replacement Cord for H.MH-170 Handpiece, HP4-174, current models
Price: $15.00
Replacement Handpiece Cord for current and newer models of H.MH-170 micromotor handpiece. See details for complete description.
Replacement Cord for H.MH-170 Handpiece-HP4-173
Price: $15.00
Replacement Handpiece Cord for older models of H.MH-170 micromotor handpiece. See details for complete description.
AP1130 Plastic Carrying Case for Portable Micromotor
Price: $50.00
Plastic Carrying Case with laser cut protective foam insert holds contents of new Portable Micromotor Kits. Carrying Case is optional and NOT included in Kits K.1030 or K.103018. No tools included.
A-KC300 Nylon Carrying Pouch for Portable Micromotor
Price: $19.00
Lightweight woven nylon carrying pouch has pockets for securing new Portable Micromotor Control Unit and Handpiece. Pouch is optional and is NOT included in Kits K.1030 or K.103018. Comes empty.
HP4-933 Cradle for Micromotor Handpieces
Price: $6.50
Cradle for holding any of Foredom's micromotor handpieces.
Return to primary rotary tools category.