Browse Categories

M.BL Bench Lathe, Domestic and Int'l Models


Price $215.00
Product Options
Plug Options:
QTY:
Use Product Options Menu to Select Plug Option: M.BL (115 Volt Domestic Model, North American Plug), M.BL-2 (230 Volt International Model, North American Plug), M.BL-21 (230 Volt UK Plug CE Model), M.BL-22 (230 Volt Continental European Plug CE Model), M-BL-26 (230 Volt Australian Plug, M.BL-32 (230 Volt Israeli Plug)

M.BL Bench Lathe has a high torque, permanent magnet motor that is extremely quiet and smooth running. Cast iron base has mounting holes and suction cup feet for a secure hold on the work surface. Comes with right and left precision machined Tapered Spindles (A-TM-5 and A-TM-6) for holding buffs and wheels up to 4" in diameter.  Other accessories including collet holders and wheel mandrels are available.
Two Year Limited Warranty.
  • 1/6 horsepower, high torque motor
  • Speed Range: 500-7,000 rpm
  • Motor shaft diameter:  5/16"
  • Height: 5-1/8", Width:  13" between spindles
  • Weight:  7.5 lbs
  • 115 Volt, 125 Watts (continuous rating), 1.8 Amp, 60 Hz, CSA Certified 
  • 230 Volt, 200 Watts (continuous rating), 3 Amp, 50 Hz, CSA Certified 














Related Products

Tapered Spindles
Price: $11.50
IMPORTANT: Tapered Spindles are Left and Right Side Specific. See Product Options for spindles that fit current lathes with 5/16" motor shafts and much older models with 1/4" motor shafts.
Wheel Mandrels
Price: $17.00
IMPORTANT: Wheel Mandrels are Left and Right Side Specific. Holds accessories with 1/4" center holes. See Product Options for Mandrels that fit current lathes with 5/16" motor shafts and much older models with 1/4" motor shafts.
Collet Holder, Right Side
Price: $38.00
IMPORTANT: Collet Holder is Right Side Specific. See Product Options for Holder that fits current lathes with 5/16" motor shafts or older models with 1/4" motor shafts. Comes with three collets for holding accessories with 1/4", 1/8", and 3/32" shanks.
Chuck Arbor, Right Side
Price: $51.00
IMPORTANT: Chuck Arbor is Right Side Specific. See Product Options for Arbor that fits current lathes with 5/16" motor shafts or much older models with 1/4" motor shafts.
Plastic Spindle Adapters
Price: $2.30
IMPORTANT: Spindle Adapters are Left and Right Side Specific. See Product Options to make your selection.
Hub Adapter for Tapered Spindles
Price: $5.80
Use to mount FX and other Wheels with 1" arbor holes onto either side of the M.BL Lathe.
MP262P Motor Brush Pair
Price: $9.00
Motor Brush pair for Bench Lathes M.BL, M.BL-2CE, BL-1, BL-1A, and BL-2A, 115 Volt and 230 Volt.
Flexades, Right Side
Price: $54.00
Flexades are Right Side Specific. See Product Options for choice of Flexade Coupling Size. 5/16" coupling for current lathes. 1/4", 1/2" and 3/8" couplings also available.
Suction Cup Foot, UA130
Price: $1.80
Replacement suction cup foot for M.BL Bench Lathe
UA117-4 Set Screws for M.BL Lathe Attachments and Flexade, 4-Pk
Price: $1.00
Set Screw for Flexade and M.BL Lathe Attachments: A-TM5, A-TM6, A-WM-5, A-WM-6, A-CHA-5, A-JCA-2. 4-pack.
MP273 Motor Brush Cap
Price: $1.00
Motor Brush Cap for M.BL, BL-1, BL-1A, BL-2 Bench Lathes.
UA112KY Allen Wrench for UA117-4 Set Screws
Price: $1.00
Allen Wrench used for UA117-4 set screws in Flexade and M.BL Lathe attachments: A-TM5, A-TM6, A-WM-5, A-WM-6, A-CHA-5 and A-JCA-2.
CP10513 Fuse for Dial Speed Controls and BL Lathes, 3 Amp
Price: $1.00
3 Amp fuse for Dial Speed Controls. Also for 115 Volt and 230 Volt M.BL Bench Lathes with detachable power cords. Fuse receptacle is rectangular.
CP10574 Fuse for M.BL Lathes, 115V, 3 Amp
Price: $2.40
3 Amp fuse for older models of 115 Volt domestic M.BL Bench Lathes with attached power cords. Fuse receptacle is round.
CP10543 Fuse for M.BL Lathes, 230V, 1.5 Amp
Price: $1.95
1.5 Amp fuse for older models of 230 Volt international M.BL Bench Lathes with attached power cords. Fuse receptacle is round.