our high torque/low speed flex shaft model, the M.LX Hang-up style
Motor, is equipped with a longer square drive shaft and heavy duty
protective sheath. It is teamed up with the C.EMX-1 table top dial Speed
Control in plastic housing.
Two Year Limited Warranty on Motor and
M.LXH Motor Description:
This square drive model has exactly the same motor specifications as the M.LX.
permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1
speed control. Damage will result if the motor is connected to any other
These permanent magnet motors are specifically designed for high
torque/low speed applications, offering more power for jobs like stone
setting, wax modeling, and pearl drilling. Square drive Series LXH flex
shafts feature full power and torque from start up and throughout the
entire speed range up to 5,000 rpm and come equipped with a motor bale for hanging, and a 63"
long, square drive shaft and heavy duty protective sheath in place of
the standard key-tip shaft and sheath. Square drive shafting ONLY works with Foredom's 4 square drive handpieces- the H.25H,
H.28H, H.30H and H.44HT.
M.LXH motors are available in 115 Volt and 230 Volt.
C.EMX-1 Speed Control Description:
Handpieces are available separately and Required to Operate your Flex Shaft Machine.
H.25H, H.30H, H.44HT and H.28H are Foredom's four square drive
handpieces that work with this motor-speed control combination and are
shown below under Related Products.
The C.EMX-1 looks the same as our standard table top control but it
has special electronics that converts AC current from an electrical
outlet to DC current, the type required by Series LX motors. This
control also has a different style plug that is made to fit the motor's
shielded-type plug. The C.EMX-1 is a solid state control in a plastic
housing that can be positioned anywhere on a work surface. The hand dial
is used to adjust and set speed. This manual style control allows you
to maintain and return to a desired speed, time and again by marking the
setting on the dial. The C.EMX-1 also has a replaceable fuse that
protects the electronics during power surges and work overloads. 5"
long, 5-34" wide, 2-58" high, ship wt 2 lbs./1 kg.
Hang-Up style motors require the use of a motor hanger (available
separately) to secure the tool above the work bench. See Related