|Email this page to a friend
Use Product Options Menu to Select Power Cord Plug Option: -2 for US Plug
(M.LXB-EMX-2), -21 for UK Plug
(M.LXB-EMX-21), -22 for Continental European
(M.LXB-EMX-22), or -26 for Australian Plug
Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EMX-2 table top dial speed control in plastic housing.
This is a 230 Volt motor-control combination with a Two-Year Limited Warranty.
M.LXB Motor Description:
These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling.
M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with our standard 39" long key tip shafting for connecting to any of Foredoms quick disconnect handpieces.
M.LXB motors are available in 115 Volt and 230 Volt.
Foredoms permanent magnet motors in 230 volt require the use of a TXR-2, SXR-2, or EMX-2 speed control. Damage will result if the motor is connected to any other speed control.
C.EMX-2 Speed Control Description:
The C.EMX-2 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-2 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-2 also has a replaceable fuse that protects the electronics during power surges and work overloads.
For use with 230 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors
5" long, 5-34" wide, 2-58" high, ship wt 2 lbs./1 kg.
are available separately and Required to Operate your Flex Shaft
Machine. Click on this link to see our extensive line of handpieces. The
Foredom flex shaft system is designed to allow interchangeability of
See Related Products below.