Use Product Options to Select Standard 39" or Optional 66" Long Shafting.
Here our high torque/low speed flex shaft model, the M.LX Hang-up style Motor, is teamed up with the C.EMX-1 table top dial Speed Control in plastic housing.
Two Year Limited Warranty on Motor and Control.
M.LX Motor Description:
These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling.
M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip shafting for connecting to any of Foredom's quick disconnect handpieces.
M.LX motors are available in 115 Volt and 230 Volt.
Foredom's permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1
speed control. Damage will result if the motor is connected to any other
C.EMX-1 Speed Control Description:
The C.EMX-1 looks the same as our standard table top control but it
has special electronics that converts AC current from an electrical
outlet to DC current, the type required by Series LX motors. This
control also has a different style plug that is made to fit the motor's
shielded-type plug. The C.EMX-1 is a solid state control in a plastic
housing that can be positioned anywhere on a work surface. The hand dial
is used to adjust and set speed. This manual style control allows you
to maintain and return to a desired speed, time and again by marking the
setting on the dial. The C.EMX-1 also has a replaceable fuse that
protects the electronics during power surges and work overloads. 5"
long, 5-34" wide, 2-58" high, ship wt 2 lbs./1 kg.
are available separately and Required to Operate your Flex Shaft
Machine. Click on this link to see our extensive line of handpieces. The
Foredom flex shaft system is designed to allow interchangeability of
Hang-Up style motors require the use of a motor hanger (available
separately) to secure the tool above the work bench. See Related