Browse Categories

K.8315 Equine Dental Kit

Item Number K.8315
Price $286.00
Motor and Speed Control combination for equine dental applications. Includes 1/6 horsepower, reversible M.SR Hang-Up style motor and C.SCT variable speed foot control. The motor in this kit comes installed with our special S-93-NC-66 non-conductive and longer than standard inner shaft and S-77-66 outer sheath.
1. Series SR Motor:
  Foredom's most popular and best motor for general use. The 1/6 hp, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors - 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging and a Non-Conductive inner shaft and outer sheath for connecting to any of Foredoms quick disconnect handpieces.The H.44T and H.25 handpieces, shown below under Related Products, are the most popular for equine applications.
The S-93-NC-66 is a special 66" long, key tip inner shaft with a plastic, non-conductive coupling that prevents the flow of stray current through the shaft and down into the handpiece. It was developed by our engineers for equine dentists and other users with similar applications. Standard key tip shafts are 39" long and have metal couplings. This special shaft fits all Series SR and Series TX motors, as well as other models, and must be used with the S-77-66 longer outer sheath.
Replacement shafts require a VERY light coating of Foredom grease before use. Be sure to unplug your motor before doing any maintenance and never operate your Foredom without the outer sheath attached.We suggest that you view our maintenance videos before installing this item. 
2. C.SCT Speed Control:
This foot operated speed control comes in a heavy cast iron metal housing. The extra weight provides added stability and control. The bottom surface of the C. SCT is covered with non-skid material. It features the same durable, solid state electronics as the C.FCT. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.SR, M.SRB, M.SRH and M.SRBH motors. CSA Listed. It is interchangeable with Foredom's C.FCT-1 and C.EM-1 controls.
7" long, 5" wide, 2-1/2" high, packaged wt-6 lb/2.7 kg
, 4 Amps, 60 Hz
Can also be used with these
115 Volt Discontinued Motors: Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors.
The C.SCT-1 can also used with a Dremel 732 flex shaft tool to vary speed. 

Related Products

MP132P Motor Brush Pair
Price: $9.00
Motor brush pair for Series SR and SRH motors, 115 Volt (domestic) and 230 Volt (international). See details.
MAMH-1 Double Motor Hanger with Mounting Clamp
Price: $49.00
Double Motor hanger with bench clamp mount features 3-pc hexagonal support rod and safety hook rod for holding one or two motors. IMPORTANT: Work Bench System Component Arms do NOT fit MAMH-1.
MS10006 Grease
Price: $3.50
Foredom Flexible Shaft Grease in a 1 oz container. Click More Info for details.
S-93-NC-66 Shaft for Most Motors, 66" Long, Optional Non-Conductive
Price: $20.00
Optional 66" long, Non-Conductive key tip inner shaft for replacement on Series SR, Series TX, Series LX, and Powergraver motors.
H.44T Handpiece, Collet Style, General Purpose
Price: $66.00
Popular among woodcarvers, H.44T comes with 3 collets and accommodates accessories with shank sizes up to 1/4".
S-77-66 Sheath for Most Motors, 63-1/4" Long, Optional
Price: $18.00
Optional 63-1/4" long outer sheath for replacement on ALL Motors when used with optional inner shafts S-93-66 or S-93-66-NC. See details.
H.25 Handpiece, Precision
Price: $165.00
H.25 is made for continuous production work. Comes with 1/8" and 1/4" collets.