Browse Categories

K.2245 Deluxe Stone Setting Kit, 2 Handpieces, 230 Volt-Int'l


Price $586.00
Product Options
Plug Options:
QTY:
Use Product Options Menu to Select Speed Control Power Cord Plug Style: K.2245-21 (United Kingdom), K.2245-22 (Continental European), K.2245-26 (Australian), K.2245-32 (Israeli), K. 2245-33 (Brazilian- 115V), and K.2245-34 (Brazilian- 230V).

PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications.
 
Deluxe Stone Setting Kit with 2 Handpieces K.2245-2 (230 Volt Model) has a Total Retail Value of $554.

Motor and Speed Control carry a 2 Year Warranty.
 
Components:
1. Series LX Motor:
These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and our standard 39" long key tip shafting for connecting to any of Foredoms interchangeable handpieces.

Two year warranty on High Torque/Low Speed Series LX Motors and Controls.
M.LX motors are available in 115 Volt and 230 Volt.

Foredoms permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control.

2. C.TXR-2 Speed Control: 
The C.TXR-2 looks the same as our standard foot operated control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX and TX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.TXR-2 features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. 7" long, 4-1/2" wide, 2-38" high, ship wt 2 lbs./1 kg.
3. H.18 Quick Change Handpiece: 
The H.18 is for use with only 2.35mm (3/32") shank burs. A press lever action is all that is required to change accessories. It features a very slim grip and pre-lubricated ball bearings that do not require any lubrication. 7" long, 19/32" dia., wt. 3.65 oz., ship wt. 4.45 oz. Member of the Foredom system of "Interchangeable Handpieces".
4. H.15 Hammer Handpiece: 
The H.15 Handpiece has a hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with an anvil point (HP10177). It requires periodic lubrication. Hammer has 1/32" stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Optional points are available: 6 different shaped Anvil Points (HP10171, HP10172, HP10173, HP10175, HP10176 and HP10179); R15PT Pave Point, and HP10212 Stylus with Carbide Tip. 6-1/4" long, 1/4" dia. at tip, wt. 3.65 oz., ship wt. 4.85 oz. Member of the Foredom system of "Interchangeable Handpieces".
5. AK90 Accessory Kit: 13-pc. assortment of step drills and steel engraving burs in small round bur holder.
6. Flexible shaft grease.






Related Products

HP10171 Anvil Point, Ball Nose
Price: $9.00
Heat treated, steel anvil point with ball nose and threaded shank, 3/32" dia. (2.35mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
HP10172 Anvil Point, Fine Point
Price: $9.00
Heat treated, steel anvil with fine point and threaded shank, .015" dia. (.4mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
HP10173 Anvil Point, Square
Price: $12.00
Heat treated, steel anvil point with square top and threaded shank, 3/32" (2.35mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
HP10175 Anvil Point, Cylinder
Price: $12.00
Heat treated, steel cylindrical anvil point with threaded shank, 7/32" dia. (6mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
HP10176 Anvil Point, Rectangle
Price: $12.00
Heat treated, steel rectangular anvil point with threaded shank, 3/32" x 3/16" (2.35mm x 4.8mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
HP10179 Anvil Point, Bezel Rocker
Price: $29.00
Heat treated, steel anvil point with bezel rocker and threaded shank measures 3/4" x 3/32" (18mm x 2.25mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
Maintenance Kit for Series TX & LX Motors, MSMK-16
Price: $22.00
For Series TX, TXM, and TXB motors, Series LX, LXM and LXB motors, 115 volt and 230 volt.
AK101 Anvil Point Kit, 6pc
Price: $75.00
Includes Ball Nose, FIne Point, Square, Cylinder, Rectangle, and Bezel Rocker threaded anvil points. Comes in small round bur holder with cover.
HP10177 Anvil Point, Flat Top
Price: $6.00
Heat treated, steel anvil point with flat top and threaded shank. Comes supplied with H.15, H.15D and H.15SJ flex shaft handpieces and MPMH-011 micromotor hammer handpiece. 4-48UNF-2A thread.
HP10212 Carbide Stylus
Price: $38.00
Carbide Stylus with threaded shank for use with flex shaft hammer handpieces H.15, H.15D and H.15SJ. 4-48UNF-2A thread.
A-R15PT Diamond Tip Pave Point, Threaded
Price: $38.00
Diamond tip Pave Point with threaded shank for use with flex shaft hammer handpieces H.15, H.15D and H.15SJ. 4-48UNF-2A thread.