Browse Categories

H.15 Handpiece, Hammer


Item Number H.15
Price $144.00
QTY:
The H.15 Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with an anvil point (HP10177). It requires periodic lubrication.
Hammer has 1/32" stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Optional points are available: 6 different shaped Anvil Points (HP10171, HP10172, HP10173, HP10175, HP10176 and HP10179); Pave Point (R15PT), and Stylus with Carbide Tip (HP10212).
6-1/4" long, 1/4" dia. at tip, wt. 3.65 oz., ship wt. 4.85 oz. 
 
Member of the Foredom system of "Interchangeable Handpieces".

Related Products

HP10171 Anvil Point, Ball Nose
Price: $9.00
Heat treated, steel anvil point with ball nose and threaded shank, 3/32" dia. (2.35mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
MS10005 Oiler
Price: $4.50
Foredom motor and handpiece oil in hypodermic dispenser has 0.25 fluid ounces or 7.7ml of oil. Click More Info for important information.
HP10172 Anvil Point, Fine Point
Price: $9.00
Heat treated, steel anvil with fine point and threaded shank, .015" dia. (.4mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
HP10173 Anvil Point, Square
Price: $12.00
Heat treated, steel anvil point with square top and threaded shank, 3/32" (2.35mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
HP48-4 Catch Ball
Price: $1.00
A Catch ball sits underneath the HP43 Spring Clip on the handpiece base and together hold the handpiece on the outer sheath. Sold in 4-pks. Used on all handpieces except slip joint.
HP10175 Anvil Point, Cylinder
Price: $12.00
Heat treated, steel cylindrical anvil point with threaded shank, 7/32" dia. (6mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
HP43 Sheath Spring Clip
Price: $1.00
Spring Clip fits over the HP48-4 Catch Ball on the handpiece base and together hold the handpiece on the outer sheath. Used on all handpieces except slip joint.
HP10176 Anvil Point, Rectangle
Price: $12.00
Heat treated, steel rectangular anvil point with threaded shank, 3/32" x 3/16" (2.35mm x 4.8mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
HP10179 Anvil Point, Bezel Rocker
Price: $29.00
Heat treated, steel anvil point with bezel rocker and threaded shank measures 3/4" x 3/32" (18mm x 2.25mm). Use with hammer handpieces H.15, H.15D and H.15SJ. Click 'More Info'.
AK101 Anvil Point Kit, 6pc
Price: $75.00
Includes Ball Nose, FIne Point, Square, Cylinder, Rectangle, and Bezel Rocker threaded anvil points. Comes in small round bur holder with cover.
HP10177 Anvil Point, Flat Top
Price: $6.00
Heat treated, steel anvil point with flat top and threaded shank. Comes supplied with H.15, H.15D and H.15SJ flex shaft handpieces and MPMH-011 micromotor hammer handpiece. 4-48UNF-2A thread.
HP10212 Carbide Stylus
Price: $38.00
Carbide Stylus with threaded shank for use with flex shaft hammer handpieces H.15, H.15D and H.15SJ. 4-48UNF-2A thread.
A-R15PT Diamond Tip Pave Point, Threaded
Price: $38.00
Diamond tip Pave Point with threaded shank for use with flex shaft hammer handpieces H.15, H.15D and H.15SJ. 4-48UNF-2A thread.