Browse Categories

Radial Bristle Discs, 1 Micron, 14,000 Grit, Lt Green, 2", 6-Pk


Item Number A-4548-6
Price $23.80
QTY:
These unique discs from 3M are a new type of abrasive that is superior to sandpaper, flap wheels, or other types of sanders, brushes, or abrasive wheels. Their flexible bristles can reach into areas with detail and irregular, curved, or flat surfaces. Woodcarvers will appreciate how well they remove the "fuzzies" without harming any of the underlying detail.
In the dental lab, these discs are excellent for cleaning, pre-polishing, and polishing of metals and acrylics. They are especially good on hard to polish materials like titanium and valplast.
Coarser grits can be used to carve, grind and texture, while finer grits will smooth, burnish and polish.
The 3M Cubitron and aluminum oxide grains embedded throughout the plastic bristles make them very long lasting.
Individual discs are stacked to make a brush. Depending on the application, you will want to stack between three and six discs. Be sure to closely follow the directions in the package so that the discs are stacked and mounted properly onto a handpiece, bench lathe or angle grinder.

IMPORTANT NOTES:
1. For Use in Handpieces: Use with A-M30 and A-M31 Mandrels when mounting discs directly into Flex Shaft Handpieces.
30,000 RPM Max Speed. 5,000 to 18,000 RPM Recommended Operating Speed.
2.
For Use on Bench Lathe: Use with A-4561 and A-4562 Spindle Adapters. 5,000 to 7,000 RPM Max Speed.
3. For Use on Angle Grinder Attachment: Use with A-69212 Short Hub to mount 1-2 discs or A-69212L Long Hub to mount 3-4 discs onto Angle Grinder.
Made in USA.

Related Products

Plastic Spindle Adapters
Price: $2.30
IMPORTANT: Spindle Adapters are Left and Right Side Specific. See Product Options to make your selection.
A-69212 Short Hub, 5mm
Price: $4.00
5mm high Short Hub with 8mm screw used for mounting accessories with arbor hole depths between 1/32" (1mm) and 5/32" (4mm) onto angle grinder. Included in Angle Grinder Kits– it secures the installed flap wheel to grinder.
A-69212L Long Hub, 8mm
Price: $4.00
8mm high Long Hub with 14mm screw used for mounting accessories with arbor hole depths thicker than 5/32" (4mm) but less than 9/32" (7mm) onto angle grinder. Comes included in Angle Grinder Kits.
A-M30 Mandrel, Screw type, 1/4" Shank
Price: $3.35
Flat head screw type mandrel with 1/4" shank for mounting accessories with 3/8" arbor holes.
A-M31 Mandrel, Screw type, 1/4" Shank
Price: $6.60
Flat head screw type mandrel with 1/4" shank for mounting accessories with 3/8" arbor holes.